Products
en

VK 420

VK 420
VK 420
Equipment

V Cutting & 90° End Notching Machine designed for the precise V cutting, arrow cutting and 90° end notching operations with minimal off cut size on PVC and aluminum profiles

Motor Power : 2 x 2.2KW~3 50/60Hz
Power supply : 400V 3P
Rotation speed : 2750 rpm
Disc dimensions : outer Ø: 420 mm, inner Ø: 30/32 mm
Dimensions / weight : 89 x 115 x 186 cm / 410kg


GENERAL FEATURES
The machine is constructed to minimize the off-cut size
Fully protected of the working area by means of safety cover.
Hydro-pneumatic V sawing head infinitely adjustable according to the profile
Manual adjustable of the back fence working in T slot mechanism
Double hand safety operation
External adjustment of hydro-pneumatic saw blade feeding
Saw blade spray cooling system
90 degrees of notching operation (optional)

STANDARD ACCESSORIES
2 x T.C.T saw blades, Ø 420 mm
2 x Horizontal pneumatic clamps
Service spanner
Air gun


OPTIONAL ACCESSORIES
Manual MKN 150, MKN 300 end-stops for V cut operations
Automatic SKN 300- SKN 450- SKN 600 end stops for V cut operations
Kit for 90° of notching operations (clamp set, back fence and 2x KP 120 rollers)
Additional saw blade Ø 420 mm
1 x vertical clamp

 

 

OTHER PRODUCTS
BARELIT INTERNATIONAL
DC 550 SE
DC 550 SE
Full Automatic Double Head Mitre Saw Machine designed for the straight or angular cutting operations of large size of profiles made of PVC and aluminium materials by means of double head sawing units equipped with Ø 550 mm of saw blades.
DC 550 SKH
DC 550 SKH
Double Head Mitre Saw Machine (Full Automatic) designed for the straight or angular cutting operations of large size of profiles made of PVC and aluminum materials by means of double head sawing units equipped with Ø 550 mm of saw blades.
MK 420 /MK 420PS/ MK 450
MK 420 /MK 420PS/ MK 450
Manual Up-Cutting Saw Machine designed for the straight and angular cutting operations of PVC aluminum, brass, wood and non-ferrous materials with the cost at very nominal rates. The machine can be used for two purposes; the lateral cutting mode and the longitudinal cutting mode.
KD 350 M
KD 350 M
Miter Saw Machine designed for straight and angular cutting of PVC, aluminum and wooden profiles
DC 550 PB
DC 550 PB
Double Head Mitre Saw Machine designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminium materials by means of double head sawing units equipped with Ø 550 mm of saw blades
PCC 6505
PCC 6505
Automatic Profile Cutting Center is a servo-controlled machine that is specifically designed for the serial cutting of any kind of PVC and aluminum profiles in the market. The machine is able to cut PVC and aluminum profiles into the required dimensions. An operator places 10 pieces of profiles of a maximum length of 6.5 m and a minimum length of 0.7 m on the feeding conveyor of the machine and presses a start button. The machine starts the cutting operation of the profiles with the help of a high-performance robot arm and saw unit as per the requested angle between the angle of 45⁰-135° then collocates them on the outlet conveyor. An operator attaches barcodes to the machined profiles to make them ready for assembly.
KD 350 P
KD 350 P
Miter Saw Machine designed for straight and angular cutting of PVC, aluminum and wooden profiles
ACK 550
ACK 550
Up-Cutting Saw Machine designed for the strait or angular cutting operations of the large size of profiles made of PVC and aluminum materials by means of Ø 550 mm of saw blade.
KD 400 M
KD 400 M
Mitre Saw Machine designed for straight and angular cutting of PVC, aluminum and wooden profiles
ACK 420
ACK 420
Up-Cutting Saw Machine designed for the strait or angular cutting operations of the large size of profiles made of PVC and aluminium materials by means of Ø 420 mm of saw blade.