PVC Corner Cleaning Machine (2 axis) designed for the cleaning of welding chips of PVC profiles that is welded at angle of 90° CNC 608: 2 x servo drive motors, CNC 610: 4 x servo motor drives
CA 603
PVC Corner Cleaning Machine (4 – 6 cutters) used for striping of bottom and top surfaces and cleaning outer corners of 90° PVC cleaning profiles.
CA 601
Semi-automatic PVC Single Corner Cleaning Machine used to clean lower and upper surfaces and outer corners of PVC profiles welded at 90° angle.
SM 201
Single Head Reinforcement Stell Screwdriver used for screwing of reinforcement steel on the PVC door and window profiles fast and precisely
SM 1000
Automatic Double Head Reinforcement Steel Screwing Machine
SM 206
Fully Automatic Double Head Reinforcement Steel Screwdriver used to screw reinforcement steel sheet to PVC door and window profiles precisely and fast.
CCL 1660
PVC Corner Cleaning Machine CNC controlled four corner PVC welding and cleaning line that provides movement in 2 and 4 axes. After welding process at DK 540, the frame goes to the Cooling Unit (SA 250) automatically. Then the Robot Unit (SA 260) automatically takes the frames from the Cooling Unit (SA 250) where the cleaning process starts and carries it by turning to the CNC 608 or 610 Cleaning Machine
PIM 6508
PVC Profile Processing Center is 8-axis CNC controlled machining center which is specifically designed to process any kind of PVC profiles in the market. The machine can do all operations on four sides of PVC profiles such as milling, opening key holes, water slots, hinge holes, handle holes, marking, saw blade cutting etc. PIM 6508 has the programming feature which provides minimum waste and maximum amount of production. 10 pieces of PVC profiles can be placed on the feeding conveyor of the machine and 3-axis pneumatic gripper moves them into the milling & cutting center for the milling and cutting operations. Operator attaches barcodes on the processed profiles to make them ready for welding operation.
PIM 6509
PVC Profile Processing Center is 8-axis CNC controlled machining center that is specifically designed to process any kind of PVC profiles in the market. The machine can do all operations on four sides of PVC profiles such as milling, opening key holes, water slots, hinge holes, handle holes, marking, saw blade cutting etc. PIM 6509 has the programming feature which provides minimum waste and maximum amount of production. 7 pieces of PVC profiles can be placed on the feeding conveyor of the machine and a 3-axis pneumatic gripper moves them into the milling & cutting center for the milling and cutting operations. The operator attaches barcodes on the processed profiles to make them ready for the welding operation.
