SWIFT COL 4125
Adhesives for Lamination

Two-component adhesive on polyurethane basis for lamination of PVC-based profiles, window sills, MDF with decorative PVC films and veneer.

Materials for lamination : PVC profiles, window sills, MDF profiles, PVC films, Veneer
Colour : Milk-White
Consistency : Liquid
Application temperature : + 18°C – + 25°C
Packaging : Tin can 25 kg

Two-component adhesive SWIFT COL 4125 on the base of polyurethane

Two-component adhesive SWIFT COL 4125 is used for profile lamination of wood products (MDF / DSP) and PVC profile and window sills with decorative PVC, PP and veneer sheets. This adhesive is recommended to be used for lamination of  PVC window profile and window sills, due to its highest resistance to moisture and environmental influences.

Area of application:

  • Production of windows and window sills (lamination of rigid PVC profiles with flexible PVC film and veneer);
  • Manufacture of furniture (lamination of MDF by synthetic paper, decorative PVC film and veneer);
  • Transport engineering (internal lamination of passenger train with PVC film).

 

TECHNICAL SPECIFICATIONS:

Lamination materials PVC profiles, window sills

MDF profiles

Coatings PVC films

Veneer

Base Polyurethane
Colour Milk-White
Consistency Liquid
Application temperature + 18°C – + 25°C
Packaging Tin can 25 kg
Shelf life Up to 12 months

Applications: bonding materials should be clean and dry, free from any dust and contamination The recommended working temperature should be between +15°C and +30°C. For the best results, it is recommended to use this adhesive with the hardener SWIFT hardener 9524 in the ratio of 1 kg of hardener to 20 kg of glue. The glue is applied to the film, after a short drying. The recommended drying temperature of the film is 50 – 60°C. In order to improve adhesion quality, the PVC profile must be treated with a primer SWIFT prime 4956 FL.  To avoid unsatisfactory bonding, the temperature of the adhesive and the surrounding environment should not be below + 10 ° C. In the case of MDF profiles, it is recommended to control the moisture content of the material at a level of 8 – 10%.

Storage conditions: glue should be stored in a closed original package under normal cool and dry storage conditions at room temperature from + 5 ° C to + 30 ° C, should be protected from direct sunlight. In such conditions, glue can be stored for at least 12 months without a negative impact on its quality.

 

 

RELATED PRODUCTS
BARELIT INTERNATIONAL
Swift Hardener 9524
Swift Hardener 9524
The hardener is intended to be used with glue "SWIFT COL 4125".
Swift Prime 4956 FL
Swift Prime 4956 FL
Primer has been specially developed for use with the adhesive for chemical action on the surface of PVC products, in order to achieve the best result of adhesion during lamination.
OTHER PRODUCTS
BARELIT INTERNATIONAL
Swift Hardener 9524
Swift Hardener 9524
The hardener is intended to be used with glue "SWIFT COL 4125".
Swift Prime 4956 FL
Swift Prime 4956 FL
Primer has been specially developed for use with the adhesive for chemical action on the surface of PVC products, in order to achieve the best result of adhesion during lamination.
Augsklei CG-60
Augsklei CG-60
Polyurethane-base two-component liquid glue "Augsklei CG-60" is used for lamination of PVC profiles, window sills and panels, aluminum profiles, MDF profiles and wood with decorative PVC films.
Augsklei Hardener 60
Augsklei Hardener 60
The hardener is intended to be used with glue "Augsklei CG-60".
Augsklei Primer 60
Augsklei Primer 60
Primer has been specially developed for use with the adhesive for chemical action on the surface of PVC products, in order to achieve the best result of adhesion during lamination.